Pioneer S-HTD50 - Manual (Page 33)

33
En
8 Using RDS (XV-HTD50 only)
Searching for a program type
You can search for a station that is broadcasting any
program type from the list on page 32.
1 Select FM with the TUNER/BAND button.
2 Press SYSTEM DISP repeatedly until
SEARCH appears in the display.
3 Use
4 and ¢ to choose the program
type, then press SYSTEM DISP.
You can search for any of the program types listed on
page 32.
After pressing DISP / RDS , the system starts searching
through the station presets for a match. When it finds
one, the search stops and the station plays for 6 seconds.
4 If you want to keep listening to the
station, press SYSTEM DISP within the 6
seconds.
If you don't press
SYSTEM DISP , searching resumes.
Displaying RDS information
You can choose to display Program Service name (PS),
Program Type (PTY), or Radio Text (RT) for the FM
station you're listening to.
1 Press SYSTEM DISP repeatedly to select
the RDS information you want to display.
Switch between:
• PS (Program Service name)
• PTY (Program Type)
• RT (Radio Text)
• SEARCH (see below for more on this)
• OFF (don't display any RDS data)
The RDS information will appear after a few seconds.
• The RDS indicator will light in the RDS mode.
• If no RDS signal can be received, the no data
message will be displayed.
• If there is noise during the RT scroll display when in
the RT mode, some characters may be temporarily
displayed incorrectly.
• In the RT mode, when no RT data is transmitted, no
radio text data is displayed.
• During RDS broadcast reception in the PTY mode,
no type data may be displayed. In this case, it will
automatically switch to PS mode after a few seconds.