Philips DVDR520H/75 - Manual (Page 14)

14
C
HANNEL
E
DITOR
Moving up or moving down the TV channel
1. Press [ p] [q] to select one of the TV channels
and press [ u].
2. Press [ p] [q] to select “Move Up” or “Move
Down” and press [ENTER].
The order of the TV channel will be changed.
Each time you press [
p] or [q] and the item changes as
follows:
3. To move the location of other TV channels, repeat
step 1~2 to complete the settings.
4. Press [ t] [u][p] [q] to select “EXIT,” press
[ENTER] to save the setting and exit the
“Channel Editor” menu.
Inserting TV channels
1. Press [ p] [q] to select a TV channels and
press [ u].
2. Press [ p] [q] to select “Insert To” and press
[ENTER].
3. Press [ t] [u][p] [q] to enter the “Channel
number,” and press [ENTER]. The channel will be
moved to the desired location.
4. To change the locations of other TV channels,
repeat step 1~3 to complete the settings.
5. Press [ t] [u][p] [q] to select “EXIT,” press
[ENTER] to save the setting and exit the
“Channel Editor” menu.
To access to the Channel Editor menu, press [SYSTEM MENU],
select “TV TUNER,” “Utilities,” “Edit channel” and press [OK].
Or, press [SOURCE] to set “TV” as the input signal source and
press [EDIT]. Either way, the Channel Editor menu will be
displayed. Swapping TV channels
This function allows you to manually swap the TV channel order
stored in the unit to match the TV channel order stored in your
TV set.
1. Press [ p] [q] to select a TV Channel and press
[ u].
2. Press [ p] [q] to select “Swap with” and press
[OK].
3. Press [ t] [u][p] [q] to enter the “Channel
number,” and press [OK] to swap. The order of
the channels will be swapped with the channel
number entered.
4. To swap other TV channels, repeat step 1- 3 to
complete the settings.
5. Press [ t] [u][p] [q] to select “EXIT,” press
[OK] to save the setting and exit the “Channel
Editor” menu.
Renaming TV channels
1. Press [ p] / [q] to select a TV channel and press
[
u].
2. Press [ p] [q] to select “Rename” and press
[OK].
The display for
entering a title name
appears.
3. Select the desired
characters from the
keypad. Press [OK]
after each entry.
4. When you finish
entering the title
name, press [
t] [u] [p] [q] to
select “Finish” to press [OK].
Notes:
You can only enter up to 10 characters for a name.