beautypg.com

Connecting the speakers, Connecting a tv, 10 english – Philips MX5000/37 User Manual

Page 12

background image

10

English

Connecting the speakers

Connect the supplied speaker systems using the supplied
speaker cables by matching the colors of the jacks and
speaker cables.

Speakers

-

+

FRONT (L/R)

black

red

CENTER

black

blue

REAR (SURROUND) (L/R)

black

gray

SUBWOOFER

black

brown

1

Press up (or down) the speaker’s jack and fully insert the
stripped portion of the speaker cable into the jack, then
release.

12 mm

a

b

c

2

Connect the Front Left speaker to the

FRONT L jacks.

Connect the Front Right speaker to the

FRONT R jacks.

Connect the Center speaker to the

CENTER jacks.

Connect the Rear Surround Left speaker to
SURROUND L jacks.

Connect the Rear Surround Right speaker to
SURROUND R jacks.

Connect the subwoofer’s audio input to the
SUBWOOFER jack.

Notes:
– Ensure that the speaker cables are correctly connected.
Improper connections may damage the system due to short-
circuit.
– For optimal sound performance, use the supplied speakers.
– Do not connect more than one speaker to any one pair of
+/- speaker jacks.
– Do not connect speakers with an impedance lower than
the speakers supplied. Please refer to the SPECIFICATIONS
section of this manual.

C

ONNECTIONS

Connecting a TV

You must connect a TV to the DVD system in order to use
the DVD player.

IMPORTANT!
– There are various ways to connect the system
to a TV (as shown in the illustration below). You
only need to make one of the best connections,
depending on the capabilities of your TV system.
– The player’s S-VIDEO jack is for use with the
built-in 3-disc DVD player only. If you plan to use a
VCR, satellite, or other equipment with this DVD
system, you must use audio/visual cables to
connect your TV to MONTOR OUT (and view
DVDs through MONITOR OUT as well).

● Use the supplied audio cables to connect

AUDIO-

TV IN (L/R) jacks to the corresponding AUDIO

OUT jacks on the TV.

● Use the supplied video cable to connect

VIDEO-

MONITOR OUT jack to the corresponding

VIDEO IN jack on a TV.

Option
If the TV has a S-Video input jack, connect it to the
VIDEO-

S-VIDEO OUT jack using an S-video cable (not

supplied) instead of MONITOR OUT jack for better
picture clarity.

IN

OUT

IN

AUDIO

CDR

OUT

TV IN

VCR

S-VIDEO

OUT

MONITOR

OUT

OUT

IN

VIDEO

DVD

VCR

GND

AM

FM (75 )

ANTENNA

L

R

Note:
– Do not connect your TV to both the S-VIDEO and
MONITOR OUT jacks.

or

This manual is related to the following products: