Philips 14 PV 202 - Manual (Page 21)

Protecting your recordings
So that you don’t accidentally delete an important recording,
remove the special tab on the narrow side of the cassette with
a screwdriver or slide the special tab to the left. Later, if you
no longer want to protect your recording, you can seal the gap
again with sticky tape or slide the special tab to the right.
Auto-assembling
You can use the auto-assembling function to join individual
recordings without any flickering between them.
a While the cassette is playing, search for the next
recording’s position on the tape.
b Press the STOP h button on the remote control. ’s’
appears on the TV screen.
c Now start recording as usual by pressing the
RECORD n button on the remote control.
d Stop recording with the STOP h button.
Selecting the recording speed (SP/LP)
You can reduce the recording speed by half. This makes it
possible to record, for example, eight-hours instead of
four-hours on an ’E240’ (four-hour) cassette.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’SPECIAL SETTINGS’ with the buttons
=P r or ;P q and confirm with the SqP
button.
c Choose the desired recording speed in the line ’RECORD
SPEED’ using the buttons
QSr or SqP .
D ’LP’: LongPlay = half recording speed (double
recording period).
’SP’: StandardPlay = normal recording speed.
d Confirm with the OK button.
e To end, press the MENU button.
D The picture quality with LP recordings will not be as
good as it is with SP recordings.
D For playback, the correct speed will automatically
be selected.
19