Philips 14 PV 202 - Manual (Page 13)

How do I read TELETEXT?
Many TV channels transmit TELETEXT information along with
their TV channels. With this TV-Video Combi you can retrieve
this information and display it on the screen using the built-in
TELETEXT decoder.
a Press the TELETEXT e button to switch the TELETEXT
decoder on. Your TV-Video Combi will now show
TELETEXT for the TV channel you have selected.
b If you want to select another page, type in the number of
the page with the number buttons
0..9 on the remote
control.
D With the colour buttons on your remote control you
can directly select the page numbers shown at the
bottom of the TV screen.
D The button
CLEAR (CL) takes you back to the start
page.
c Press the TELETEXT e button to switch the TELETEXT
decoder off.
Special TELETEXT functions
In TELETEXT mode you can use the special TELETEXT
functions. These are shown along the bottom of the TV screen.
a During TELETEXT operation, press the MENU button.
The following symbols are shown along the bottom edge
of the TV screen:
: enlarge font
: switch TELETEXT decoder off temporarily
: select TELETEXT sub-page
: recall hidden information
: stop page changes
: show TELETEXT in transparent mode
b Select the respective function using QSr or
SqP .
c Confirm with the OK button.
D To call up a TELETEXT sub-page enter the number of
the sub-page after confirming the entry with the
button
OK using the buttons 0..9 .
e.g.: for sub-page 5 enter ’0005’.
Wake up function (WAKE-UP)
You can programme your TV-Video Combi to switch on at a
predetermined time and wake you up.
The TV-Video Combi will switch on at the predetermined time
playing the channel last selected and switches itself off
automatically after one hour.
a Press the MENU button on the remote control.
The main menu will appear.
b Select the line ’WAKE UP’ with the menu buttons
=P r or ;P q and confirm with the SqP
button. This picture will appear on the screen:
WAKE UP
TV ON/OFF W OFF X
TV WAKE UP TIME 00:00
EXIT: MENU STORE: OK
c Use the buttons =P r or ;P q to select the line ’TV
ON/OFF’.
d Use the button SqP in the line to select ’ON’ (wake
up timer activated).
D If you select ’OFF’ the timer will be switched off.
e Use the buttons =P r or ;P q to select the line: ’TV
WAKE UP TIME’ for the wake up time of the TV set.
f Enter the desired time using the QSr or
SqP buttons or with the number buttons 0..9 .
g Store these settings using the OK button.
h To end, press the MENU button.
i Use the buttons ;P q , =P r or the numeric buttons
0..9 of the remote control to select the programme which
you want to be woken up to.
j Switch off the TV-Video Combi with the button
STANDBY m .
11