Philips SNR6500 - Manual (Page 26)

EN
27
After completing hardware setup by connecting all your network devices, you need
to configure your computer to connect to the ADSL Wireless Base Station.
See: ‘Windows 2000’
‘Windows XP’
‘Wireless adapters’
TCP/IP Configuration
To access the Internet through the ADSL Wireless Base Station, you must configure
the network settings of the computers on your LAN to use the same IP subnet as the
Wireless Base Station. The default IP settings for the Wireless Base Station are:
IP Address 192.168.1.3
Subnet Mask 255.255.255.0
DHCP function Enable
DHCP IP Pool Range 192.168.1.2 to 192.168.1.254
Note: These settings can be changed to fit your network requirements, but you must first
configure at least one computer to access the Wireless Base Station's web
configuration interface in order to make the required changes. (See ‘Configuring the
Wireless Base Station’ on page 10 for instruction on configuring the Wireless Base
Station.)
Windows NT 4.0
1 On the Windows desktop, click Start/Settings/Control Panel.
2 Double-click the Network icon.
3 In the Network window, select the Protocols tab.
Double-click TCP/IP Protocol.
4 When the Microsoft TCP/IP Properties window opens,
select the IP Address tab.
Configuring Client PC