Pella Clad Hinged patio Door With Adjustable HInges 80JJ0103 User Manual

Page 4

E. Plumb and square door. Place shims at each hinge and lock

strike location between the door and the sides of the opening.

)NSERT

REVEAL

Note: On center latch double doors the lock strike will not be
shimmed since it is located in the center of the unit. DO NOT
over shim.

F. Check the interior reveal. Make sure the

measurement from the interior face of the door
to the interior face of the wall is equal at several
points around the door.

Note: If the dimensions are not equal, check
to make sure the ﬁns are folded out to 90° at
all points.

NAILS

Note: Make sure the ﬁn corner is lying as ﬂat as possible.
When using the optional ﬁn at the sill, attach
the aluminum sill support or wood blocking
under the sill of the door before proceeding
to Step H.

(

shipping spacers.

Note: Be sure to remove the spacers from
the bottom edge of the door panel.

Double doors with center latch: Designer Series Only: Use the
construction handle to operate the active door panel. Operate the
ﬂushbolts per the instructions on the label on the strike located on
the astragal.

Architect Series Only: Use the construction handle to operate both
the active and passive door panels.

I. Out-swing doors: Place a dab of sealant in each of the pre-

DRILLED

Note: Single doors will have two pre-drilled holes, double
doors will have four.

I1. Out-swing double doors only: Place a dab of sealant into the

center hole of the strike plate located at the sill of the door.

)NSTALL

Note: For masonry ﬂoors, use a #8 masonry screw instead of
the wood screw.

J. On center latching (double) doors: Place shims at the top of the door frame above the center

STRIKE

J1. On center hinged double doors: Insert and attach shims directly above the astragal in the center of

the unit.

sure that the screw passes through the shims and into the structural framing.
Note: This step does not apply to center hinge double doors.

&YUFSJPS

*OUFSJPS

У д О д

{ д x д

И д З д

*OUFSJPS