Pella Clad Hinged patio Door With Adjustable HInges 80JJ0103 - Manual (Page 7)

When applying siding, brick veneer or other exterior finish material, leave adequate space between
the door frame and the material for sealant. Refer to the illustration that corresponds to your
finish material.
Note: The sealant details shown are standard recommendations from the sealant industry. Contact
your sealant supplier for recommendations and instructions for these and any other applications.
5
SEALING THE DOOR TO THE EXTERIOR WALL CLADDING
A. Install the hardware. Refer to the instructions
INCLUDED
B. Insert closed cell foam backer rod into the space
AROUND
CLEARANCE
Note: Backer rod adds shape and depth for the
sealant line.
C. Apply a bead of high quality exterior grade sealant
to the entire perimeter of the door. At each end of
the bottom of the door, insert sealant into the spaces
between the bottom of door and the sill support and
connect it to the perimeter sealant.
D. Shape, tool and clean excess sealant.
the sealant should be the shape of an hourglass.
Note: This method creates a more flexible sealant
line capable of expanding and contracting.
E. Remove plastic guards at the base of the door
once construction is complete.
#3*$,7&/&&3
$MFBSBODF
#BDLFS3PEBOE
4FBMBOUUZQJDBM
1FSJNFUFS4FBMBOU
NVTUFYUFOEUP
SPPNTJEFPG
"DDFTTPSZ(SPPWF
"DDFTTPSZ(SPPWF *OTVMBUJOH
'PBN
.JO
7*/:-45&&-
4*%*/(
$MFBSBODF
#BDLFS3PEBOE
4FBMBOUUZQJDBM
*OTVMBUJOH
'PBN
1FSJNFUFS4FBMBOU
NVTUFYUFOEUP
SPPNTJEFPG
"DDFTTPSZ(SPPWF
"DDFTTPSZ(SPPWF
.JO
$MFBSBODF
4FBMBOUUZQJDBM
*OTVMBUJOH
'PBN
"DDFTTPSZ
(SPPWF
800%
4*%*/(
$MFBSBODF
*OTVMBUJOH
'PBN
4FBMBOUUZQJDBM
1FSJNFUFS4FBMBOU
NVTUFYUFOEUP
SPPNTJEFPG
"DDFTTPSZ(SPPWF
"DDFTTPSZ(SPPWF
.JO
800%4*%*/(
8*5)53*.
x
x