Planet Technology MGSW-004 - Manual (Page 8)

4
Console ports
The RS-232 console port is an interface that directly connects to the PC. When the
connection between the PC and switch is ready, run the Hyper Terminal and configure its
communication parameters. The operating mode of the console port is:
Ø Baud rate: 9600
Ø Data bits: 8
Ø Parity: none
Ø Stop bits: 1
Ø Flow control: none
After finished the setting, click OK.
2.2 Rear Panel
The Rear Panel of the switch is indicates an AC inlet power socket and on and off switch,
which accepts input power from 100-240V AC, 50-60Hz.
Rear Panel of MGSW-004
Power Receptacle
For the compatibility with electric service in most of areas, MGSW-004 ’s power supply can
automatically adjust line power in the range 100-240V AC, 50-60Hz.
Power On
Connect the power cord to the power socket on the Rear Panel of the Switch. The other side of
power cord connects to the power outlet.
Power Notice:
1. The device is a power-required device, it means, it will not work till it is powered. If your
networks should active all the time, please consider using UPS (Uninterrupted Power
Supply) for your device. It will prevent you from network data loss or network downtime.
2. In some area, installing a surge suppression device may also help to protect your switch
from being damaged by unregulated surge or current to the Switch or the power
adapter.
2.3 Hardware installation
MGSW-004 can be placed on desktop or mounted on rock. If this switch is used as standalone
standard, the user can immediately use most of the features simply by attaching the cables
and turning the power on.