beautypg.com

Chapter 3 console and telnet management, 1 connect to pc by rs-232 cable, 2 telnet – Planet Technology MGSW-004 User Manual

Page 10

background image

6

Chapter 3 Console and Telnet Management

3.1 connect To PC by RS-232 cable

The RS-232 console port is an interface that directly connects to the PC. When the connection

between the PC and switch is ready, run the Hyper Terminal and configure its

communication parameters. The operating mode of the console port is:

Ø Baud rate: 9600

Ø Data bits: 8

Ø Parity: none

Ø Stop bits: 1

Ø Flow control: none

After finished the setting, click OK.

3.2 Telnet

To access the switch through Telnet

1.

Make sure switch is configure with an IP address and switch is reachable from PC.

2.

Start telnet program from PC and connect to the switch. The management interface is

exactly same with RS-232 console.

See also other documents in the category Planet Technology Computer Accessories: