Controls and displays 04 – Pioneer VSX-1014TX User Manual

Page 28

Controls and displays

(TUNE/ST +/–) /ENTER

Use the arrow buttons when setting up your surround
sound system (see page 38). Also used to control DVD
menus/options and for deck 1 of a double cassette deck
player. Use the

TUNE +/–

buttons to find radio

frequencies and use

ST +/–

to find preset stations

(page 48).

TV CONTROL buttons

These buttons are dedicated to control the TV assigned to
the

TV CONT

button. Thus if you only have one TV to hook

up to this system assign it to the

TV CONT MULTI

CONTROL

button. If you have two TVs, assign the main

TV to the

TV CONT

button (see page 50 for more on this).

Use to turn on/off the power of the TV.

TV VOL +/–

Use to adjust the volume on your TV.

INPUT SELECT

Use to select the TV input signal.

TV CH +/–

Use to select channels.

Component control buttons

The main buttons (

, etc.) are used to control a

component after you have selected it using the

MULTI

CONTROL

buttons.

The controls above these buttons can be accessed after
you have selected the corresponding

MULTI CONTROL

button (for example

DVD/LD

DVR/VCR

TV/SAT

(when connected to a DTV)).

DTV ON/OFF

Switches a digital TV on/off.

DTV INFO

Use to bring up information screens on a digital TV.

TUNER DISPLAY

Switches between named station presets and radio
frequencies (page 48).

MPX

Switches between stereo and mono reception of FM
broadcasts. If the signal is weak then switching to
mono will improve the sound quality (page 47).

AUDIO

Changes the audio language or channel on DVD
discs.

CH RETURN

Returns to the last channel selected with DTV, SAT
and some TVs.

SUBTITLE

Displays/changes the subtitles included in
multilingual DVD-Video discs.

CH +/–

Use to select channels when using a TV, VCR, DVR,
etc.

The following DVR controls can be accessed by pressing

SHIFT

REC

Starts recording.

REC STOP

Stops recording.

HDD/DVD

These buttons switch between the hard disk and DVD
controls for DVD/HDD recorders.

RECEIVER CONTROL buttons

THX

Press to select a Home THX listening mode
(page 31).

STANDARD

Press for Standard decoding and to switch between
the various Pro Logic IIx and Neo:6 options (page 30).

ADV. SURR

Use to switch between the various surround modes

(page 31).

STEREO

Switches between direct and stereo playback. Direct
playback bypasses the tone controls and any other
signal processing for the most accurate reproduction
of a source (page 32).

AUTO SURR

Press to have the receiver automatically detect what
kind of source you’re playing and select multichannel
or stereo playback as necessary (page 30).

ACOUSTIC EQ

Press to select an Acoustic Calibration EQ setting
(page 33).

SIGNAL SELECT

Use to select an input signal (page 33).

MIDNIGHT/LOUDNESS

Use Midnight when listening to movie soundtracks at
low volume. Use Loudness to boost the bass and
treble at low volume (page 36).

EFFECT/CH SEL

Press repeatedly to select a channel, then use –/+ to
adjust the level

(page 45). Also adjusts the level of the

Advanced Surround effects (page 31) as well as
Dolby Pro Logic IIx Music (page 32) and Neo:6 Music
parameters (page 32). You can then use the

and

–

buttons to make these adjustments.

VSX_1014.book.fm 28 ページ２００４年５月１４日　金曜日　午前９時２４分