Display, Controls and displays 04 – Pioneer VSX-1014TX User Manual
Page 25
Controls and displays
04
25
En
Display
1
Speaker indicators
(page 56)
Lights to indicate the current speaker system,
A
and/or
B
.
2
SIGNAL SELECT indicators
Lights to indicate the type of input signal assigned for the
current component:
AUTO
Lights when
AUTO
signal select is on.
DIGITAL
Lights when a digital audio signal is detected.
ANALOG
Lights when an analog signal is detected.
3
Digital format indicators
2
DIGITAL
Lights when a Dolby Digital encoded signal is
detected.
DTS
Lights when a DTS encoded signal is detected.
4
Program format indicators
These change according to which channels are active in
Dolby, DTS, DVD-A and SACD sources.
LS
,
S
and
RS
will light at the same time to indicate
6.1channel sources.
•
L
– Left front channel
•
C
– Center channel
•
R
– Right front channel
•
LS
– Left surround channel
•
S
– Surround channel (mono) or surround back
channel
•
RS
– Right surround channel
•
LFE
– Low frequency effects channel
5
Matrix decoding format indicators
2
PLII
This lights to indicate Pro Logic II / Pro Logic IIx
decoding (see
Listening in surround sound
on
page 30 for more on this).
Neo:6
When one of the Neo:6 modes of the receiver is on,
this lights to indicate Neo:6 processing (see
Listening
in surround sound
on page 30 for more on this).
6
Listening mode indicators
THX
Lights when one of the Home THX modes is selected.
VIR.SB
Lights during Virtual surround back processing.
ADV.SURR.
Lights when one of the Advanced Surround modes
has been selected.
AUTO SURR.
Lights when the Auto Surround feature is switched
on (see
Auto playback
on page 30).
7
MIDNIGHT / LOUDNESS
When Midnight or Loudness listening is switched on, the
corresponding indicator shows in the display.
8
Input source indicators
Light to indicate the input source you have selected.
9
ATT
Lights when
INPUT ATT
is used to attenuate (reduce) the
level of the analog input signal.
10 OVER
Lights to indicate that the level of an analog source is too
high. Use the attenuator (
INPUT ATT
) to reduce it.
11 Master volume level
Shows the overall volume level.
–80dB
indicates the
minimum level, and
+12dB
indicates the maximum level.
2
1
3
4
14
11
6
13
12
16
10
8
9
7
15
5
6
SIGNAL
AUTO
SP
A B
DIGITAL
DIGITAL
L
L
S
C
S
R
R
S
LFE
PL
ADV.SURR. VIR.SB
N
eo
THX
DVD
DVR
TUNER
CD-R
CD
VIDEO1
VIDEO2
T V
6
DTS
SR
AUTO SURR. MONO STEREO TUNED DE
MIDNIGHT LOUDNESS
OVER
dB
ATT
SLEEP
ANALOG
VSX_1014.book.fm 25 ページ ２００４年５月１４日 金曜日 午前９時２４分