Pride Mobility Controller GC2 - Manual (Page 11)

Basic Operation Instructions 11
www.pridemobility.com GC2 Controller
Joystick Control
The joystick controls the driving speed and direction of the power chair. When
the joystick is at rest, it is in the neutral (center) position, and the chair is
stationary. In order to drive the chair, the joystick must be taken out of neutral.
Moving the joystick in any direction will switch the chair from neutral to
drive, and the chair will move in the direction indicated by joystick position.
The farther away from the neutral position the joystick is, the faster the chair
will move in that direction. To stop chair movement, simply release the
joystick or move it back to the neutral position. The chair’s electromagnetic
brakes will engage after the chair has come to a controlled stop.
OPERATING THE GC2 CONTROLLER
The GC2 controller is used to operate your power chair and all of its
components.
The GC2 controller system consists of (see figure 2):
1. Joystick
2. Control panel
3. Joystick module
4. Off-board charging/programming socket
5. Power module
6. Controller communication connector
Figure 2. GC2 Controller
3
4
1
6
5
2