Manage the area code, Auto prefix, First ring – Philips CD360 User Manual
Page 31
31
4
Enter the prefix number, then press [OK]
to confirm.
The setting is saved.
»
Note
To enter a pause, press and hold
•
.
Note
If the prefix number is set and the detect
•
number is left empty, the prefix number is
added to all outgoing calls.
Note
The feature is unavailable if the dialed number
•
starts with
*
and #.
First ring
If you have subscribed for caller ID service with
your service provider, your phone can suppress
the first ring before the caller ID displays on
the screen. After the phone is reset, it can
detect automatically if the caller ID service
is subscribed and start to suppress the first
ring. You can change this setting to suit your
preference. This feature only applies to models
with first ring support.
Turn the first ring on/off
1
Press menu.
2
Select [ADVANCED SET] > [FIRST
RING], then press [OK] to confirm.
3
Select [ON]/[OFF], press [OK] to
confirm.
The setting is saved.
»
Note
•
To reset the first ring status, go to the reset
menu. (see ‘Restore default settings’ on page
Manage the area code
Note
This feature only applies to models with area
•
code support.
You can define an area code (up to 5 digits).
This area code is automatically removed from
an incoming call if it matches with the code you
define. Then the phone number is saved in the
call log without an area code.
Activate/Deactivate auto removal of
area code
1
Press menu.
2
Select [ADVANCED SET] > [AREA
CODE], then press [OK] to confirm.
3
Enter the area code, then press [OK] to
confirm.
The setting is saved.
»
Auto prefix
This feature checks and formats your outgoing
call number before it is dialed out. The prefix
number can replace the detect number you
set in the menu. For example, you set 604 as
the detect number and 1250 as the prefix.
When you have dialed out a number such as
6043338888, your phone changes the number
to 12503338888 when it dials out.
Note
The maximum length of a detect number is 5
•
digits. The maximum length of an auto prefix
number is 10 digits.
1
Press menu.
2
Select [ADVANCED SET] > [AUTO
PREFIX], then press [OK] to confirm.
3
Enter the detect number, then press
[OK] to confirm.
English
EN