Palsonic HDMI TFTV812A - Manual (Page 18)

9.75
5 AUTO SCAN
: EXIT
Memorizing the Channels
When you turn on the TV for the first time, you should perform an auto channel search to set up stations on your TV.
Note: Be sure to select the TV source input before operation.
Auto Channel Search
You should perform an auto channel search to search for all channels
available and stores them in memory.
1
Press 4to begin the auto channel search.
The TV begins memorizing all the channels available in your area.
Press MENU and the main menu screen display.
2
Note
= If you want to stop the auto scan, press MENU button.
16
3
Press 5or6 to select AUTO SCAN item.
Press 3or4to select TV menu, press 6 to access.
4
Manual Channel Search
Use MANUAL SCAN if desired channels can not be memorized or if you
would like to store programs to specific channel numbers one by one.
1
Press 4to begin the manual channel search.
Select a channel that you want to perform manual search with
channel select buttons.
2
Note
= If you want to stop the manual scan, press MENU button.
3
Enter into TV menu, press 5or6 to select MANUAL SCAN item.
Press 4, the set searches towards higher frequency.
Press 3, the set searches towards lower frequency.
The search stops when a program is found and this program will be
stored in current channel.
Setting Color/Sound System
1
Press 3or4to select a proper color system(normal please select
AUTO) or sound system.
2
3
Enter into TV menu, press 5or6 to select COLOR SYSTEM or
SOUND SYSTEM item.
To exit, press MENU button repeatedly.
Normally it is unnecessary to set color system and sound system. However,
if abnormal color or sound occurs, you may try to adjust the color or sound
system.
55.25
1 MANUAL SCAN
:BACKWARD :FORWARD :EXIT
COLOR SYSTEM
SOUND SYSTEM
AUTO SCAN
MANUAL SCAN
CHANNEL EDIT
PAL
BG
MOVE SELECT EXIT
TV
COLOR SYSTEM
SOUND SYSTEM
AUTO SCAN
MANUAL SCAN
CHANNEL EDIT
PAL
BG
MOVE SELECT EXIT
TV
COLOR SYSTEM
SOUND SYSTEM
AUTO SCAN
MANUAL SCAN
CHANNEL EDIT
PAL
BG
MOVE SELECT EXIT
TV