Palsonic HDMI TFTV812A - Manual (Page 16)

Basic Operations
With the power on, press the Power button on the unit or on the remote control to turn off the unit, and put the unit in
standby mode.
To cut off the power completely, press the Power Switch.
Turning On
Insert the power cord into the wall outlet.
Press the Power Switch on the unit, then press the Power button on the unit or on the remote control.
The unit will be turned on and you will be ready to use its features.
Turning Off
Turning On/Off the Power
Selecting the Input Signal Source
1
2
3
Press SOURCE button.
Press 4 button to confirm the selection.
Press 6or 5to select the input source.
Options include:
! TV — Watch the TV signal.
! AV1 — Watch the signal from the AV1 input terminals.
! AV2 — Watch the signal from the AV2 input terminals.
! S-Video — Watch the signal from the S-VIDEO input terminal.
! YPbPr — Watch the signal from the COMPONENT input terminals.
! VGA — Watch the signal from the VGA jack.
! HDMI1 — Watch the signal from the HDMI 1 input jack.
! HDMI2 — Watch the signal from the HDMI 2 input jack.
= You can also make use of SOURCE button on the TV set to select the input source.
Note
Displaying the Status Information
Press the DISPLAY button to display the current status information such as channel number or signal source.
14
= You can also use VOL+/- , MENU, SOURCE or buttons on the TV set to turn on the TV.
Note
! If there is no signal input for a certain time, the TV will auto go to standby mode.
Note
SOURCE
TV
AV1
AV2
S-Video
YPbPr
VGA
HDMI1
HDMI2
MOVE SELECT