Manual channel search, Channelnumber or frequency display, Manual channel number allocation – Philips TYPE VR 175 User Manual
Page 14

12
Manual channel search
In certain cases the Automatic Channel Search may not be
able to find all of the TV channels (e.g. coded TV channels).
You can then use this manual method to set the channels.
1
Press the
AUTOINSTALL
button on the video recorder.
2
Select and confirm ’MANUAL SEARCH’ .
3
Hold the
P q
button until you have found the right TV
channel. A changing channel number or frequency will
appear on the TV screen. You can choose the channel
number or frequency display. Please read ’Channelnum-
ber or frequency display’ below.
4
Confirm with the
OK
button.
5
Select and confirm the programme number that you wish
to allocate to this TV channel (e.g.: ’P 01’ ).
6
If you want to allocate more TV channels, repeat
steps
3
to
5
until all TV channels have been stored.
7
To end, press the
STANDBY m
button.
Note: Channel number or frequency can also be entered
directly at step
3
, using the
0-9
buttons.
* Allocating a decoder: If you want to allocate a
decoder, press the
INDEX E
button at step
3
until
’DEC’ appears in the display.
Channelnumber or frequency display
1
Press the
AUTOINSTALL
button on the video recorder.
2
Select and confirm ’CHANNEL/FREQUENCY’ .
3
Select and confirm ’CHANNEL’ or ’FREQUENCY’ .
Manual Channel Number Allocation
You can allocate any desired programme number to the
TV channels stored by the ’Automatic Channel Search’.
1
Press the
AUTOINSTALL
button.
2
Select and confirm ’CHANNEL ALLOCATION’ .
3
Use the
P r
or
P q
button, to select the TV channel
on the TV screen, to which you wish to allocate a
programme number (starting with ’P 01’ ).
4
Confirm this allocation. If you wish to allocate further
programme numbers, repeat step
3
and step
4
until you
allocated a programme number to all the required
TV channels.
5
To end press the
STANDBY m
button.
Note: If you want to delete an unwanted TV channel,
press the
CLEAR (CL)
button at step
3
.
* Monitor function: You can switch to and fro between
TV reception and video recorder reception with the
MONITOR
button. This only functions when you used a
scart cable to connect the video recorder to your TV set
and if your TV set responds to this switch-over.