Philips TYPE VR 175 - Manual (Page 13)

11
Tuner mode
You can also use your video recorder as a TV receiver
(tuner).
1 Hold the STOP h button, until appears in the
display.
2 Choose the required programme number with the P r
or P q button or with the 0-9 buttons.
3 Switch the video recorder off by pressing the
STANDBY m button when you no longer want to watch
television.
TIMER recordings controlled by a
satellite receiver
Do you have a satellite receiver or another device, which can
control other equipment by a TIMER function? This video
recorder can be TIMER-controlled via socket
EXT.2 , by
means of a scart cable.
1 Insert a cassette. Switch off with the STANDBY m but-
ton.
2 Hold the MONITOR button until ’REC.P’ appears in the
display.
3 If you want to interrupt this function before the TIMER
recording has actually started, hold the
MONITOR button
until the video recorder switches off.
4 If you want to interrupt this function while a TIMER
recording is being made, press the
STANDBY m button.
Selecting OSD
You can switch the On Screen Display (OSD) on or off.
1 Press the AUTOINSTALL button on the video recorder.
2 Select and confirm ’OSD’ .
3 Select and confirm ’ON’ or ’OFF’ .
Note: With the OK button you can superimpose the
actual status of the set on the TV screen.
Channel number or frequency display
4. SPECIAL FEATURES