Precor TRM 800 - Manual (Page 55)

Chapter
4
Treadmill Safety Features
Before allowing users on Precor equipment, review the
Important Safety Instructions in this manual. You should also
teach your patrons how to use the equipment safely,
according to the guidelines on.
Entering the Safety Code
When the equipment is shipped from the factory, safety code
protection is not active.
After you have activated the safety code, you must inform
your patrons that the equipment requests a safety code to
prevent unauthorized use. They must complete the following
steps to use the equipment.
To enter the safety code and start the treadmill:
1.
Assume the starting position, with one hand free to enter
the code and the other hand holding a handrail.
Important: Hold the handrail securely with at least one hand
throughout the following steps.
2. When you see the banner text on the console, select a
program or press GO.
3. When you are prompted to enter the safety code and
unlock the treadmill, press the 1, 2, 3, and 4 keys in order.
If you have entered the code correctly, the workout
begins. Otherwise, the equipment pauses for two seconds
and then prompts you to enter the code again. Pressing
five or more keys returns you to the initial safety code
prompt.
Note: On a treadmill, a 3-second countdown appears on the
console before the running belt starts to move.