Precor TRM 800 - Manual (Page 19)

Assembling the Treadmill
17
Hardware Kit (not to scale)
The hardware kit shipped with this equipment contains the
fasteners and other hardware components shown in the
following table. Before you begin assembly, make sure that
your hardware kit is complete. If not, please contact Precor
Customer Support.
Fasteners Quantity
Power cord clips 6
⁵₁₆ -inch x ³₄-inch socket head
screws
8
⁵₁₆
-inch x ³₄-inch buttonhead
screws (zinc finish)
6
⁵₁₆
-inch x ³₄-inch buttonhead
screws (black finish)
4
Flat head hex drive screws (¹₄-inch
x ³₄-inch) 4
⁵₁₆ -inch locknuts with star washers 4
⁵₁₆ -inch split lock washers 10
⁵₁₆
-inch flat washers (zinc finish) 6
⁵₁₆
-inch flat washers (black finish) 12
Note: Retrieve the cables and other hardware shipped with
the console before you begin installation.