beautypg.com

Adjusting subwoofer settings 61, Using the high pass filter, Audio adjustments – Pioneer DEH-P55BT User Manual

Page 61: Adjusting subwoofer settings

background image

# To turn subwoofer output off, push
MULTI-CONTROL down.

3

Push MULTI-CONTROL left or right to

select the phase of subwoofer output.
Push

MULTI-CONTROL left to select reverse

phase and

SUB W:REV appears in the display.

Push

MULTI-CONTROL right to select normal

phase and

SUB W:NOR appears in the dis-

play.

Adjusting subwoofer settings

When the subwoofer output is on, you can ad-
just the cut-off frequency and the output level
of the subwoofer.

1

Press AUDIO to select S/W.

Press

AUDIO until S/W appears in the dis-

play.

# When the subwoofer output is on, you can se-
lect

S/W.

2

Push MULTI-CONTROL left or right to

select cut-off frequency.
Each time

MULTI-CONTROL is pushed left or

right, cut-off frequencies are selected in the
following order:
50

—63—80—100—125 (Hz)

Only frequencies lower than those in the se-
lected range are outputted from the subwoo-
fer.

3

Push MULTI-CONTROL up or down to

adjust the output level of the subwoofer.
Each time

MULTI-CONTROL is pushed up or

down, subwoofer level increases or decreases.
+6 to

–24 is displayed as the level is increased

or decreased.

Using the high pass filter

When you do not want low sounds from the
subwoofer output frequency range to play
from the front or rear speakers, turn on the
HPF (high pass filter). Only frequencies higher
than those in the selected range are outputted
from the front or rear speakers.

1

Press AUDIO to select HPF.

Press

AUDIO until HPF appears in the display.

# When the F.I.E. function is on, you cannot se-
lect

HPF.

2

Push MULTI-CONTROL up to turn high

pass filter on.
80 appears in the display. High pass filter is
now on.

# If the high pass filter has been previously ad-
justed, the frequency of that previously selected
will be displayed instead of

80.

# To turn high pass filter off, push
MULTI-CONTROL down.

3

Push MULTI-CONTROL left or right to

select cut-off frequency.
Each time

MULTI-CONTROL is pushed left or

right, cut-off frequencies are selected in the
following order:
50

—63—80—100—125 (Hz)

Only frequencies higher than those in the se-
lected range are outputted from the front or
rear speakers.

Audio Adjustments

En

61

English

Section

12