Pioneer DEH-P55BT - Manual (Page 53)

Listening to songs on your
iPod
1 1 1 1 2 2 2 2
3 3 3 4 4 4
You can use this unit to control an iPod adapter,
which is sold separately.
These are the basic steps necessary to operate
an iPod adapter. More advanced iPod adapter
operation is explained starting on Introduction
of advanced iPod adapter operation on the next
page.
1 Song number indicator
Shows the number of song played in the se-
lected list.
! If the number of songs is more than
10 000, last 4-digit of the number of song
is displayed.
2 Play time indicator
Shows the elapsed playing time of the cur-
rent song.
3 Battery strength indicator
Shows the battery strength of cellular
phone.
! Battery strength indicator may differ
from the actual battery strength.
4 Signal level indicator
Shows the signal strength of cellular phone.
! Signal level indicator may differ from the
actual signal level.
1 Press SOURCE to select the iPod.
Press SOURCE until you see IPOD displayed.
2 To perform fast forward or reverse,
push and hold MULTI-CONTROL left or
right.
3 To skip back or forward to another
track, push MULTI-CONTROL left or right.
Pushing
MULTI-CONTROL right skips to the
start of the next track. Pushing
MULTI-CONTROL left once skips to the start
of the current track. Pushing again will skip to
the previous track.
Selecting a playlist
You can select a playlist from your iPod play-
list.
% Push MULTI-CONTROL up or down to
select a playlist.
# Playlist name is displayed for four seconds.
# If no songs have been stored in playlist, STOP
is displayed and playback stops.
Displaying text
information on iPod
Text information recorded on the iPod can be
displayed.
% Press DISPLAY.
Press
DISPLAY repeatedly to switch between
the following settings:
Play time
—SONG TITLE (song title)—
ARTIST NAME (artist name)
—ALBUM TITLE
(album title)
# If the characters recorded on the iPod are not
compatible with this unit, those characters will
not be displayed.
Playing songs on iPod
En
53
English
Section
10