Receiving traffic announcements – Pioneer DEH-P55BT User Manual
Page 19
2
Push MULTI-CONTROL up to turn the re-
gional function on.
REG :ON appears in the display.
# To turn the regional function off, push
MULTI-CONTROL down.
Notes
! Regional programming and regional networks
are organized differently depending on the
country (i.e., they may change according to
the hour, state or broadcast area).
! The preset number may disappear on the dis-
play if the tuner tunes in a regional station
which differs from the originally set station.
! The regional function can be turned on or off
independently for each FM band.
Receiving traffic
announcements
TA (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to. TA
can be activated for both a TP station (a sta-
tion that broadcasts traffic information) or an
enhanced other network
’s TP station (a station
carrying information which cross-references
TP stations).
1
Tune in a TP or enhanced other net-
work
’s TP station.
When you are tuned into a TP or enhanced
other network
’s TP station the TP indicator will
light.
2
Press TA to turn traffic announcement
standby on.
Press
TA and TA appears in the display. The
tuner will stand-by for traffic announcements.
# To turn traffic announcements standby off,
press
TA again.
3
Use MULTI-CONTROL to adjust the TA
volume when a traffic announcement be-
gins.
Rotate it to increase or decrease the volume.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
4
Press TA while a traffic announcement
is being received to cancel the announce-
ment.
The tuner returns to the original source but re-
mains in the standby mode until
TA is pressed
again.
# You can also cancel the announcement by
pressing
SOURCE, BAND or MULTI-CONTROL
while a traffic announcement is being received.
Notes
! You can also turn the TA function on or off in
the menu that appears with the pressing of
FUNCTION.
! The system switches back to the original
source following traffic announcement recep-
tion.
! Only TP and enhanced other network’s TP sta-
tions are tuned in during seek tuning or BSM
when TA is on.
RDS
En
19
English
Section
05