Panasonic CF-27 Series - Manual (Page 9)

9
Getting Star
ted
7
Please store the floppy disks in a safe place. They will enable you to return your
computer to close to the condition at the time of purchase should any problems
occur.
When creating floppy disks, do not run any other application program.
When creating floppy disks and the message [Insufficient files to copy] is dis-
played, click [OK] and then contact Panasonic Technical Support.
While the MP indicator ( ) is on, do not remove the floppy disk, power down
your computer or use the suspend or hibernation function ( "Suspend/
Hibernation Functions").
CAUTION
Prepare 2HD floppy disks and make sure they are not in the write-protected state, then
select [Start] - [Programs] - [Panasonic] - [Create BACKUP DISK] and follow the
on-screen instructions. Place a label identifying the contents on each disk.
Create backup disks
Input the correct date, time and time zone and press [Close].
You can also complete these settings at a later time. 7
Simply follow the on-screen instructions. You can complete these settings at a
later time.
Press [Next] to complete the printer setup or [Cancel] to skip. 8
NOTE
Name of created backup disk
FIRSTAID FD
(When the display for creating the UPDATE DISK is shown, create the disk by fol-
lowing the on-screen instructions.)
Eject Button
8
Install the Acrobat ® Reader 3.01
2
3
1 In [Start] - [Run], input [c:\util\reader\ar32e301.exe], then press [OK].
When the message [Do you wish to continue?] is displayed, press [Yes].
After reading the "Software License Agreement", select [Yes] if you agree to the
terms.
Press [Next].
4
Press [Finish].
Read the [Readme] file as necessary. To close the file, click
in the top right
corner of the window.
5
Press [Next] and set up the Acrobat ® Reader 3.01.
Press [OK].
6
Acrobat ® Reader is necessary to view the Reference Manual, which explains
detailed operational procedures concerning your computer.
NOTE
Label-side up
Insert the shutter-side
headfirst.
This concludes the first-time use operation guidelines.
7
Then, when the alignment of the touchscreen is needed, perform [Calibrate] in
[Touchscreen Control] . (
page 17)