Philips 21PV548/07 - Manual (Page 12)

Selecting a TV channel
Select the required TV channel (= the programme number)
with the
;P q , =P r buttons or with the digit buttons
0..9 on the remote control.
D The connected decoder can only be used for one TV
programme. If you would like to switch to a different
TV channel which also requires the decoder during
recording, the following message will appear on the
screen: ’DECODER IN USE’.
Channel number of the scart socket
a Select the channel number ’E1’ using the button 0 on
the remote control.
Channel number of the sockets A/V on the
front
a Select channel number ’E1’ using the button 0 on the
remote control and then select channel number ’AV’
using the button
=P r .
b Use the number buttons 0..9 on the remote control to
select the channels on the TV-Video Combi.
Volume control
You can adjust the volume using the QSr , SqP
buttons on the remote control.
D If you would like to change the volume on the
machine, press the button P /S on the TV-Video
Combi and change the volume using the buttons
q or r .
D If you want to mute the sound temporarily (e.g.:
during a telephone call), press the MUTE y button
on the remote control. When you press the
MUTE y button again, the sound will return at its
original volume level.
D While the sound is turned off, ’y’ will appear on the
screen.
Picture settings
The picture can be adjusted according to your personal
preferences.
These settings are automatically stored after exiting the main
menu.
a Press the MENU button. The main menu appears.
b Confirm the line ’TV SETTINGS’ using the button
SqP .
TV SETTINGS
BRIGHTNESS W (,=,,$ X
COLOUR (,,=,$
CONTRAST
(,=,,$
SHARPNESS (,,=,$
START UP VOLUME (=,,,$
CONTRAST PLUS ON
AVL OFF
EXIT: MENU
c Select the desired line with the =P r or ;P q button
and modify the settings using the QSr or
SqP button.
D If you TV-Video Combi also has the function:
START UP VOLUME(Switch-on volume) ,
CONTRAST PLUS, AVL(Automatic volume control)
, please read more detailed information in the
respective section.
d To end, press the MENU button.
(Switch-on volume)
The function ’START UP VOLUME’ (switch-on volume)
regulates the volume when turning on the TV-Video Combi to
this preset value.
a In the line ’START UP VOLUME’ change the volume
using the buttons
QSr or SqP .
Contrast Plus
With the ’Contrast Plus’ function, the contrast of the TV
pictures is automatically adapted to the picture content.
a To switch this function on, select ’ON’ in the line
’CONTRAST PLUS’ with
SqP .
D If you select ’OFF’, the function will be switched off.
3. TV SET FUNCTIONS
10