How to use the on screen menu, Input signal status, Picture adjusting knob status – Panasonic BT-LH1700WP User Manual

Page 10: Menu display

Three types of information are displayed on the screen. The input signal status, picture adjusting knob status, and
the menu display.

1. The selected input line (

J page 7, )

• VIDEO, Y/C, SDI1, SDI2,

/RGB-VIDEO/RGB-COMP.

2. Signal format

• The display status can be set in “STATUS

DISPLAY” in the “SYSTEM CONFIG” menu

(

• If “UNSUPPORT SIGNAL” is displayed, then either

the current input signal is not supported or the
“INPUT SELECT” menu setting needs to be
changed.

• When “NO SIGNAL” is displayed, there is no input

signal.

Note:
“UNSUPPORT SIGNAL” and “NO SIGNAL” may not be
displayed correctly.

Picture adjusting knob (

J page 7, )

• This knob can be rotated and pushed.
• The status display appears when the knob is

pushed.

The display disappears when the knob is pushed
again, or if the knob is not operated for 10 seconds.

• Settings can only be adjusted in the status display.
• The display position can be changed (

“ROTARY POSITION”).

Status display:
PHASE, CHROMA, BRIGHT, CONTRAST

Note:
The volume knob status display is not displayed on the
screen.

• This is displayed when the menu is used.
• The display disappears if remains idle for 2 minutes.
• The display position can be changed (

“MENU POSITION”).

Input signal status

Picture adjusting knob status

Menu display

Displays the operation explanation for the
menu button.

How to Use the On Screen Menu