Philips MX6000I/37 - Manual (Page 13)

Connecting the speakers and the
subwoofers
We recommend connecting all speakers. At least the
front speakers (left and right) and the subwoofers
must be connected. If you do not connect all speakers,
press SURROUND repeatedly to select S
TEREO after
switching on the Streamium System.
When connecting the speakers make sure the colors
of the speaker cables correspond with the colors of the
connectors.
1
Insert the supplied speaker cables into the click-fit
connectors on the speakers.
2
Then connect the speaker cables to the corresponding
click-fit connectors on the rear of the unit so that the
colors of the speaker connectors and the speaker cables
match.
Speaker
++ −−
Front Left white black
Front Right red black
Center green black
Surround Left blue black
Surround Right grey black
Subwoofer Left purple black
Subwoofer Right purple black
How to use the click fit connectors
1
Press down the clip and fully insert the stripped portion of
the speaker cable into the socket.
2
Release the clip again.
Connecting the tuner antennas
Connecting the FM antenna
1
Connect the supplied FM antenna cable to the
FM ANTENNA jack on the rear of the unit.
2
Extend the antenna cable and put it in a position where the
reception is best.
Connecting the AM antenna
1
Assemble the supplied AM loop antenna as shown above.
2
Connect the antenna to the AM ANTENNA jack on the
rear of the unit.
3
Place the antenna on a shelf or mount it on the wall in a
position where the reception is best.
Connecting …
13
English
ETHERNET
AUX IN TV IN LINE OUT S - VIDEO
AM FM
OFF ON
R
L
ANTENNA
P-SCAN
CVBS
AUDIO VIDEO OUT COMPONENT
➠