Powermatic 1632 - Manual (Page 6)

SPECIFICATIONS: 1632 Open-End Sander
Working width (reversing stock) ....................................................................................................................... 16" (32")
Working thickness...................................................................................................................................................... 5"
Minimum board length.........................................................................................................................................13-3/4"
Head configuration ......................................................................................................................................combination
Feed motor (1632-3) ..................................................................................................................................1/4 HP, 3 Ph
Feed motor (1632-1) .................................................................................................................................. 1/4 Hp, 1 Ph
Feed speeds (variable FPM) .............................................................................................................................. 15/32.5
Sanding belt dimensions .......................................................................................................................... 17" W x 54" L
Sanding belt speed (SFPM) .................................................................................................................................. 2,200
Compressed air requirements at 5 atm (PSI)................................................................................................................4
Dust collection minimum CFM required.................................................................................................................... 800
Dust port diameter...................................................................................................................................................... 4"
Overall dimensions ......................................................................................................................40" L x 29" W x 66" H
Main motor (1632-3)..................................................................................... 7-1/2 HP, 3 Ph, 230/460V (prewired 230V)
Main motor (1632-1).................................................................................................................... 5 HP, 1 Ph, 230V only
Net weight ......................................................................................................................................................... 996 lbs.
Shipping weight...............................................................................................................................................1,106 lbs.
NOTE: The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications without notice and without
incurring obligations.