Powermatic 1632 - Manual (Page 2)

2
This manual has been prepared for the owner and operators of a Powermatic Model 1632 Sander. Its purpose, aside
from machine operation, is to promote safety using accepted operating and maintenance procedures. To obtain
maximum life and efficiency from your Sander and to aid in using it safely, please read this manual thoroughly and
follow the instructions carefully.
Warranty and Service
WMH Tool Group warrants every product it sells. If one of our tools needs service or repair, one of our Authorized
Service Center located throughout the United States can provide quick service or information.
In most cases, a WMH Tool Group Service Center can assist in authorizing repair work, obtaining parts, or perform
routine or major maintenance repair on your Powermatic product.
For the name of an Authorized Service Center in your area, please call 1-800-274-6848, or visit our web site at
www.wmhtoolgroup.com
More Information
Remember, WMH Tool Group is consistently adding new products to the line. For complete, up-to-date product
information, check with your local WMH Tool Group distributor, or visit our web site at www.wmhtoolgroup.com
WMH Tool Group Warranty
WMH Tool Group makes every effort to assure that its products meet high quality and durability standards and
warrants to the original retail consumer/purchaser of our products that each product be free from defects in materials
and workmanship as follows: 1 YEAR LIMITED WARRANTY ON ALL PRODUCTS UNLESS SPECIFIED
OTHERWISE. This Warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or
accidents, normal wear-and-tear, repair or alterations outside our facilities, or to a lack of maintenance.
WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD SPECIFIED ABOVE, BEGINNING
FROM THE DATE THE PRODUCT WAS PURCHASED AT RETAIL. EXCEPT AS STATED HEREIN, ANY
IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT
ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY
NOT APPLY TO YOU. IN NO EVENT SHALL WMH TOOL GROUP BE LIABLE FOR DEATH, INJURIES TO
PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES
ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION
MAY NOT APPLY TO YOU.
To take advantage of this warranty, the product or part must be returned for examination, postage prepaid, to an
Authorized Service Center designated by our office. Proof of purchase date and an explanation of the complaint
must accompany the merchandise. If our inspection discloses a defect, we will either repair or replace the product at
our discretion, or refund the purchase price if we cannot readily and quickly provide a repair or replacement. We will
return the repaired product or replacement at WMH Tool Group’s expense, but if it is determined there is no defect,
or that the defect resulted from causes not within the scope of WMH Tool Group’s warranty, then the user must bear
the cost of storing and returning the product. This warranty gives you specific legal rights; you may also have other
rights, which vary from state to state.
WMH Tool Group sells through distributors only. Members of the WMH Tool Group reserve the right to effect at any
time, without prior notice, alterations to parts, fittings and accessory equipment, which they may deem necessary for
any reason whatsoever.