Polaroid FLM-3230TM - Manual (Page 56)

53
Searching for a Device Code
If none of the codes listed under Device Codes list match your
device, you can search for a set of commands that will work.
Your Remote will sample all the codes in its system to find one
that will allow you to control your device.
As the Remote searches its library, it starts with the most
popular device in the category and works through to the end.
To cycle through each available device code and sample its
functions:
Mode → <> (2 blinks)→ [9] [9] [1] (2 blinks) →Device Group No. (2 blinks)→
Power → [CH +] →[CH +]→[CH +] → … SET (2 blinks)
STEP 1 Select the [MODE] by pressing VCR, CBL, or AUX.
STEP 2 Depress and hold <> button for a minimum of 3 seconds until LED blinks
twice.
STEP 3 Enter the code sequence [9][9][1]. The LED blinks once for every digit entered
except for the last digit, where it shall blink twice to confirm that [9][9][1] are entered
correctly.
STEP 4 Press Power button. Then, pressing CH+ repeatedly to cycle through each
corresponding function until your device turns off (or on).
STEP 5 Pressing SET button will store the new device code and returns to normal
operation. The LED blinks twice in confirmation.
Mode Device Assignment
Device
Group no.
TV Locked to this TV (Default) -------
VCR Universal VCR, DVD, PVR 2
CBL Universal Cable, Satellite, Video Accessory 0
AUX
Universal Tuner, Amplifier, CD, Mini Disc. And Misc. Audio,
Home Automation
3
Example: [VCR ]
→<> (2 blinks) →[9]→[9]→[1] (2 blinks) → [2] (2 blinks) →
[POWER] →[CH +] →[CH +]→… [SET] (2 blinks).