Panasonic KX-TG5453 - Manual (Page 31)

Intercom Features
For assistance, please call 1-800-211-PANA (7262). 31
Intercom
Intercom calls can be made between a
handset and the base unit (and between 2
handsets, KX-TG5452 and KX-TG5453
only).
Note:
L
If you have difficulty hearing the other
party while using the speaker, decrease
the speaker volume.
L
If you receive a phone call while talking
on the intercom, you will hear 2 tones
(page 39, 42). To answer the call, press
{
OFF}, then press {C} or {s}.
L
You cannot change the ringer tone for
intercom calls.
For KX-TG5451 users
From the handset to the base unit
1
Handset:
Press {INTERCOM}.
L
The base unit will beep for 1 minute.
L
To stop paging, press {OFF}.
2
Base unit:
Press {LOCATOR/INTERCOM} to
answer the page.
3
Handset:
When finished talking, press {OFF}.
Note:
L
During an intercom call, the handset
user can switch to the speaker by
pressing {s}. To switch back to the
receiver, press {C}.
L To adjust the base unit’s speaker
volume, press {>} or {<} repeatedly. 8
levels (high to low) are available.
From the base unit to the handset
1
Base unit:
Press {LOCATOR/INTERCOM}.
L
The handset will beep for 1 minute.
L
To stop paging, press {LOCATOR/
INTERCOM}.
2
Handset:
Press {C}, {s}, or {INTERCOM} to
answer the page.
3
Base unit:
When the paged party answers, speak
into the MIC.
4
Base unit:
When finished talking, press
{
LOCATOR/INTERCOM}.
Note:
L You can locate a misplaced handset by
paging it. (Handset locator)
TG5451_5452_5453.book Page 31 Friday, February 18, 2005 11:38 AM