Panasonic KX-TG5453 - Manual (Page 27)

Caller ID Service
For assistance, please call 1-800-211-PANA (7262). 27
not be announced. The announcement
is heard at the ringer volume (page 38,
42).
L
When you receive a call while on the
phone, the 2nd caller’s name will not be
announced even if you subscribe to both
Caller ID and Call Waiting with Caller ID
services.
L
If this feature is turned off, caller names
will not be announced (page 39, 43).
L
Usually the unit will announce the
caller’s name after the 2nd ring. If you
turn on the answering system, and set
the ring count to “2” (page 54), the unit
will not announce the caller’s name. If
“Toll saver” is selected, and there is
a new message, the unit will not
announce the caller’s name.
L
KX-TG5452 and KX-TG5453 only:
If an outside call is received while on an
intercom call between the handset and
base unit, the other handsets will ring,
but the caller’s name will not be
announced.
Ringer ID and light-up ID
This feature can help you identify who is
calling by using different ringers and ringer
indicator colors for different callers stored
in the phonebook. You can assign a
different ringer and indicator color to each
phonebook item. When a call is received
from a caller stored in the phonebook, the
ringer and indicator color are used after
Caller ID information is displayed.
L
Usually the ringer and indicator color will
be changed from the 2nd ring.
Ringer ID
You can assign a different ringer tone to
each caller in the phonebook. If you select
“No Ringer ID”, the unit will use the
ringer tone you set on page 38 when a call
is received from that caller. The default
setting is “No Ringer ID”.
1
Press {Phonebook}, then press
{
Search}.
2
Press {V} or {^} repeatedly to display
the desired item.
3
Press {Option}.
4
Press {1} to select “Ringer ID”.
5
Press {V} or {^} repeatedly to select
the desired ringer tone.
L
You can also select the ringer tone by
pressing {1} to {7}, or {0} (“No
Ringer ID”).
6
Press {Save}, then press {OFF}.
Light-up ID
You can assign a different ringer indicator
color to each caller in the phonebook.
Select “Color1-Default” (Amber),
“Color2” (Green), “Color3” (Red), or
“Multicolor”.
1
Press {Phonebook}, then press
{
Search}.
2
Press {V} or {^} repeatedly to display
the desired item.
3
Press {Option}.
4
Press {2} to select “Light-up ID”.
5
Press {V} or {^} repeatedly to select
the desired ringer indicator color.
L
You can also select the color by
pressing {1} to {4}.
6
Press {Save}, then press {OFF}.
TG5451_5452_5453.book Page 27 Friday, February 18, 2005 11:38 AM