Polycom 55PP9753 - Manual (Page 27)

27
Using Active Control™ Plus+
®
®
® ®
2
2
1
3
Active Control Active picture Active display
63
15
36
52
20
04
44
Medium
Contrast
Dynamic contrast
Color
Sharpness
DNR
Motion
Tint
Active Control™ Plus+ monitors incoming
video signals from the Tuner, AV1, AV2, and
Side inputs and adjusts key picture settings
for best picture quality. In addition to measur-
ing picture noise, this feature uses an ambient
light sensor (located on the front of the TV)
to adjust the picture settings according to
viewing conditions in the room. When you
choose to turn Active Control™ Plus+ on,
you have the options Minimum, Medium, or
Maximum. Maximum is the recommended
option.
NOTE: Active Control™ Plus is disabled
with the AV3 and AV4 input sources.
1 Press the Active Control™ button on
the remote control to display the
“Active Control” menu.
2 Press the Cursor Up or Down button to
select one of the options: “Minimum,”
“Medium,” “Maximum,” or “Off.”.
NOTE: The Active Control™ values
shown in the information window will
based on the current AutoPicture™ set-
ting: Personal, Rich, Natural, Soft,
Multimedia, or Eco.
3 Press the Active Control button to
remove the on-screen menu from the
TV screen.
Active Control™ Plus+ Settings
Minimum—Sharpness, Dynamic Contrast,
and Noise Reduction are controlled auto-
matically.
Medium—Sharpness, Color, Dynamic
Contrast, and Noise Reduction are con-
trolled automatically.
Maximum—Sharpness, Color, Contrast,
Dynamic Contrast, and Noise Reduction are
controlled automatically.
c c C
HECK
I
T
O
UT