Ch3. configuration, Chapter 3: configuration – Planet Technology VDSL2 VC-200M User Manual
Page 18
Chapter 3: Configuration
3.1 Determine your connection settings
Before you configure the router, you need to know the connection information
supplied by your VDSL2 service provider.
3.2 Connecting the VDSL2 Router to your network
Unlike a simple hub or switch, the setup of the VDSL2 Router consists of more than
simply plugging everything together. Because the Router acts as a DHCP server, you
will have to set some values within the Router, and also configure your networked
PCs to accept the IP Addresses the Router chooses to assign them.
Generally there are several different operating modes for your applications. And you
can know which mode is necessary for your system. These modes are router, bridge.
3.3 Configuring with Web Browser
It is advisable to change the administrator password to safeguard the security of your
network.
1. To configure the router, open your browser, type
http://192.168.1.100
for
VC-200M and
http://192.168.1.200
for VC-200S in the browsers address box.
Save this address in your Favorites for future reference.
At login prompt will appear, and default password is “admin”, then click 'LOGIN'.