Planet Technology DVR-400 - Manual (Page 17)

13
CAMERA SELECT
The DVR-400 provides 4 camera inputs. Please use channel buttons on the front panel to select specified
channel for real-time display.
Please use “SELECT” button or “CHANNEL” buttons for different combinations for channel display.
Example:
a) When you choose (----), all cameras are off
b) When you choose (1234), video content in all cameras will be displayed.
c) When you choose (1---), only the content of channel 1 will be displayed.
Channel Display Control
In “EACH” mode, you can use the following buttons to display Full-screen
format of each channel.
Channel 1 button: Full screen display of channel 1
Channel 2 button: Full screen display of channel 2
Channel 4 button: Full screen display of channel 4
Channel 3 button: Full screen display of channel 3
MAIN MENU
Ø CAMERA SELECT 1 - - -
RECORD SELECT 1 - - -
RECORD MODE EACH
RECORD FRAMERATE 30
VIDEO QUALITY MORRMAL
RECORD SCHEDULE
SUB MENU
HARD DRIVE SETUP
SENSOR SETUP
NETWORK SETUP
PRESS (Щ,Ъ), THEN (SELECT)
PRESS (MENU) TO EXIT
ë Note
Channel Display Control
In ”EACH” mode, you can use the following buttons to display
Full-screen format of each channel.
ë Note
While no video connection or connection failure,
“VIDEO LOSS” signal will be displayed, and the built-in
alarm buzzer will be triggered to sound.