Planet Technology DVR-400 - Manual (Page 11)

7
STEP5:
Please ensure DVR-400 is power OFF before commencing, and check the power supply status.
Use standard RJ-45 cables to connect the LAN port on DVR-400.
Connect the supplied Power Adapter and power on machine.
The PWR LED Indicator should be Green during normal operation
After powering on the DVR-400, it will check HDD for several seconds; the information will be
displayed on the monitor:
After the internal checking completed, DVR-400 will enter into real-time display mode, the images
on the connected camera will be displayed in real-time.
HDD Checking…
MASTER HARD DRIVE
[HDD Model number]
CH1
HDD Checking…OK
LAN Checking…OK
Audio Checking…OK
CH2
CH3 CH4