Philips FW-V795 - Manual (Page 32)

32
English
3139 115 21281
Listening to External Sources
1 Connect the audio out terminals of the external
equipment (TV, VCR, Laser Disc player, DVD
player or CD Recorder) to the AUX/CDR IN
terminals of your system.
ECO POWER
CD 1•2•3 BAND
CDR / DVD TAPE 1•2
PROG DUBBING REC CLOCK• TIMER AUTO REPLAY
STANDBY-ON
MUSIC LEVEL
INTERACTIVE VU METER
VOLUME
P R EV PRESET N EX T
DEMO STOP/ CLEAR
PLAY• PAUSE
S EA RCH • TUNI N G
TUNER
TAPE AUX
DISPLAY
SOURCE
DOLB Y
B NR
VCD PAL/ NTSC
ON • OFF LEVEL
PBC
RETUR N
TITLE/
ALBUM
NAME
TITLE
A LBUM
MIC/
LEVEL
DYNAMIC AMPLIFICATION CONTROL
MP3-CD
ECO POWER
External Sources
2 Press AUX (CDR/DVD) repeatedly to select
CDR/DVD mode or normal AUX mode.
➜ "
CDR/DVD" or "AUX" will be displayed.
● If the sound from the external source is
distorted, select CDR/DVD mode for listening.
Notes:
– You are advised not to listen to and record from
the same source simultaneously.
– All the navigation sound control features (DSC or
VAC for example) are available for selection.
– Refer to the operating instructions for the
connected equipment for details.
For Recording, please refer to “Tape
Operation/Recording”.
Maintenance
Cleaning the Cabinet
● Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
● When a disc becomes dirty,
clean it with a cleaning cloth. Wipe the disc from
the centre out. Do not wipe in circular motion.
● Do not use solvents such as benzine, thinner,
commercially available cleaners, or antistatic
spray intended for analogue records.
Cleaning the disc lens
● After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.
Cleaning the Heads and the Tape Paths
● To ensure good recording and playback quality,
clean the heads
A
, the capstan(s)
B
, and
pressure roller(s)
C
after every 50 hours of
tape operation.
● Use a cotton swab slightly moistened with
cleaning fluid or alcohol.
● You also can clean the heads by playing a
cleaning tape once.
C C B B A
Demagnetising the heads
● Use a demagnetising tape available at your
dealer.
pg 001-035/V795/21-Eng 4/16/02, 6:44 PM 32