Tape recording – Philips MAS85 User Manual
Page 18
18
English
General information on
recording
● For recording, use only tape of IEC type I
(normal tape).
● The recording level is set automatically, regardless
of the position of the Volume, DBB and so forth.
● The tape is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for six to seven
seconds.
● To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.
IMPORTANT!
– Recording is permissible if copyright
or other rights of third parties are not
infringed upon.
Preparation for recording
1
Load a recordable tape into tape deck with full
spool to the left.
2
Prepare the source to be recorded.
CD – load a disc.
TUNER – tune to the desired radio station.
Tape Recording
One touch recording
1
Push FUNCTION to CD or TUNER to
select the source.
●
If desired, program CD track numbers.
2
Start playback of the selected source.
3
Press RECORD
â to start recording.
To stop recording
●
Press
70.
Helpful hints:
– When recording from AM (FW) radio stations,
adjust BEAT CUT to 1 or 2, if necessary, to
reduce interference.
p001-p021_MAS85_21-Eng
5/7/05, 11:50
18