Philips MAS85 - Manual (Page 15)

15
English
CD Operation
Discs for playback
This system can playback all digital audio CD,
finalized digital audio CD-Recordable (CDR)
discs and finalized digital audio CD-Rewritable
(CDRW)discs.
IMPORTANT!
– This system is designed for regular
discs. Therefore, do not use any
accessories such as disc stabilizer rings or
disc treatment sheets, etc., which may
jam the changer mechanism.
– Do not load more than one disc into
each tray.
– CDs encoded with copyright
protection technologies by some record
companies may be unplayable by this
system.
Playing discs
1
Press POWER to on, then push FUNCTION
to CD.
2
Press OPEN/CLOSE to open the disc trays.,
and load your discs in the two trays.
● To load a third disc, press DISC CHANGE (on
the remote control) to rotate the disc trays.
Helpful hints:
– Make sure the disc label is facing up.
3
Press OPEN/CLOSE to close the disc trays.,
➜ A lighted DISC button indicates that a disc is
being read in the disc tray.
➜ Display shows: --, 00 and later, the total
number of tracks.
4
Press ÉÅ to start playback.
➜ Display shows: current track number.
01
3
C D C H A N G E R
CLOCK.TIMER
VOLUME DEMO
SHUFFLE
PLAY
MODE
SIDE SET CLOCK TIMER SET BAND
RECORD DUBBING
CD TAPE PROGRAM
RDS
MODE
1
2
3 TIMER DBB PROGRAM AMPM SHUFFLE FMMW LW SW STEREO NR FRONT BACK RECORD HSD
2
2 1
1
● To start playback from a selected disc tray, press
DISC 1, 2 or 3.
5
To pause playback, press ÉÅ.
Press ÉÅ again to resume playback.
6
To stop playback, press STOP Ç.
7
To remove the disc, press OPEN/CLOSE to
open the disc trays.
● If necessary, press DISC CHANGE (on the
remote control) to rotate the disc trays.
Helpful hints: CD playback will also stop when:
– you select TUNER or TAPE.
Selecting and searching
Selecting a different track
● Briefly press 4 or ¢ once or several times
to skip to the beginning of the current, previous
or subsequent track.
or
Use the digit keys on the remote control to
select the track number directly. e.g.
Track 2: Press 2
Track 10: Press +10,
Track 12: Press +10 and then, 2
Track 22: Press +10, +10 and then, 2.
● In the pause/stop position, press ÉÅ to start
playback.
➜ Playback of selected track starts.
p001-p021_MAS85_21-Eng 5/7/05, 11:49 15