Pentax K10D - Manual (Page 9)

Image Capture Device: Interline interlace CCD with a primary color filter
Shake Reduction – CCD Image Sensor Shift
Total Pixels – 10.75 megapixels
Color Depth – 8 bit (JPEG) or 12 bit (RAW) x 3 colors
Effective Pixels: 10.2 megapixels
Recorded Pixels: JPEG: 10M 3872x2592 pixels
6M 3008x2000 pixels
2M 1824x1216 pixels
RAW: 10M 3872x2592 pixels
Focus System: TTL phase-matching 11-point autofocus system (SAFOX VIII) w/AF assist lamp
Autofocus Modes - AF-Single (with focus lock), AF-Continuous, Manual
Illumination Range – EV1 - EV19 (At ISO 200 with 50mm f1.4 lens)
Lens Mount: PENTAX KAF mount compatible with PENTAX KAF2, KAF and KA mount
lenses
Power zoom function - Not available
K-mount lenses - usable with restrictions
S-mount lenses - usable with adapter and restrictions
67/645 lenses - usable with adapter and restrictions
DA 18-55mm Lens: DA series smc PENTAX zoom
Focal Length - 18mm - 55mm
35mm Equivalent - 27mm -83mm
Aperture Range – F3.5 – F5.6
Construction - 12 elements in 9 groups
Light Metering: TTL open-aperature metering
16-segment, Center-weighted & Spot meter
Range: EV1 - EV21.5 (at ISO 200 with 50mm f1.4 lens)
Sensitivity: ISO Auto, 100, 200, 400, 800, 1600
Exposure Control: Green, Program AE, ISO Priority AE, Shutter Priority, Aperture Priority, Shutter
& Aperture Priority, Metered Manual, X-Sync, Bulb
Exposure Compensation - +/-3 EV (1/2 or 1/3 steps)
Auto Exposure Lock - Pushbutton type with approx. 20 sec. timer
Depth of Field Preview - Via main switch
Auto Bracketing: 3 frames +/-1.5EV (1/2 steps) or +/-1EV (1/3 steps)
Shutter: Electronically controlled vertical-run focal plane shutter
Shutter Speed - 1/4000 - 30 seconds and Bulb
White Balance: TTL Auto, Pre-set, Custom white balance
Auto, Daylight, Shade, Cloudy, Tungsten light, Fluorescent light, Flash, Manual