Philips DVD763SA/001 - Manual (Page 24)

Diagnostic Software, Trouble Shooting and Test Instructions EN 39 DVD763SA 5.
5.8.5 Log Nuclei
5.8.6 Miscellaneous Nuclei
5.8.7 Video Nuclei
5.8.8 Furore Nuclei
Error
code
Error text
3100 "Show error log"
3101 "Error log is invalid"
3102 "Error log could not be read from NVRAM"
3103 "I2C bus busy before start"
3200 "Show error bit"
3201 "Error log is invalid"
3202 "I2C bus busy before start"
3203 "Error log could not be read from NVRAM"
3300 "Error log is cleared"
3301 "Error log could not be cleared"
3302 "I2C bus busy before start"
Error
code
Error text
3400 Test successful
3401 “The configuration data could not be read
from NVRAM”
3402 “I2C bus busy before start”
3500 “NVRAM is cleared”
3501 “The NVRAM could not be reset.”
3502 “I2C bus busy before start”
3600 “NVRAM contents updated.”
“NVRAM contents and configuration
checksum updated.”
3601 “NVRAM contents could not be updated.”
3602 “I2C bus busy before start”
3603 “NVRAM contents could not be read”
3604 “NVRAM not accessible.”
3605 “NVRAM checksum could not be updated.”
1500 Test successful
1502 “NVRAM access time-out”
1504 “NVRAM fails”
5400 Test successful
5401 “I2c bus busy”
5402 “I2c bus not working“
5403 “Scart switch controller not responding”
5404 “Scart switch controller response not correct”
5500 Test successful
5501 “I2c bus busy”
5502 “I2c bus not working“
5520 Test successful
5521 “I2c bus busy”
5522 “I2c bus not working“
5523 “Scart switch controller not responding”
5200 Test successful
5201 “I2c bus busy”
5202 “I2c bus not working“
5300 Test successful
5301 “I2c bus busy”
5302 “I2c bus not working“
5320 Test successful
5321 “I2c bus busy”
5322 “I2c bus not working“
4700 “Number of times Tray went Open : XX”
4701 The total number of times tray went open
could not be read from NVRAM.
4702 I2C bus busy before start
4720 “Total Power On time (minutes) : XX”
4721 The total power-on time could not be read
from NVRAM.
4722 I2C bus busy before start
4740 “Total CDDA & VCD disks Play-time
(minutes) : XX”
4741 The playtime of CDDA & VCD disks could not
be read from NVRAM.
4742 I2C bus busy before start
4760 “Total DVD disks Play-time (minutes) : XX”
4761 The playtime of DVD disks could not be read
from NVRAM.
4762 I2C bus busy before start
4600 “Version of Application Software : XX”
4601 “The application version could not be read
from NVRAM.”
4602 “I2C bus busy before start”
Error
code
Error text
2300 Test successful
2320 Test successful
2340 Test successful
2400 Test successful
2401 “I2c bus busy”
2421 “I2c bus busy”
2441 “I2c bus busy”
2500 Test successful
2501 “I2c bus busy”
2502 “I2c bus not working“
2520 Test successful
2521 “I2c bus busy”
2522 “I2c bus not working“
2540 Test successful
2541 “I2c bus busy”
2542 “I2c bus not working“
6100 Test successful
6100 Test successful
Error
code
Error text
8300 "Test successful"
8301 "Invalid Version ID read. "
8400 "Test successful"
8420 "Test successful"
Error
code
Error text