Panasonic KX-FP205AL - Manual (Page 43)

8. Programmable Features
43
Setting recall time {#}{ 7}{2} The recall time depends on your telephone exchange or host
PBX.
{
1} “ 900ms”
{ 2} “ 700ms”
{ 3} “ 600ms”
{ 4} “ 400ms”
{ 5} “ 300ms”
{ 6} “ 250ms”
{ 7} “ 200ms”
{ 8} “ 160ms”
{ 9} “ 110ms”
{*} “ 100ms” (default)
{ 0} “ 90ms”
{#} “ 80ms”
Note:
L If the unit is connected via a PBX, this setting may need to be
changed in order for PBX functions (transferring a call, etc.) to
work correctly. Consult your PBX supplier for the correct
setting.
L If you set the location setting to “ NEW ZEALAND” (feature #74
on page 43), the default setting will be “ 600ms”.
Setting the location
where you use this unit {#}{ 7}{4} This setting must match your location.
{
1} “ AUSTRALIA” (default): To use in Australia.
{ 2} “ NEW ZEALAND”: To use in New Zealand.
Setting the connecting
tone {#}{ 7}{6} If you often have trouble when sending faxes, this feature allows
you to hear connecting tones: fax tone, ring back tone and busy
tone. You can use those tones to confirm the status of the other
party’s machine.
{
0} “ OFF”: Deactivates this feature.
{ 1} “ ON” (default): You will hear connecting tones.
Note:
L If the ring back tone continues, the other party’s machine may
not be a fax machine or may have run out of paper. Check with
the other party.
L The connecting tone volume cannot be adjusted.
Changing the receiving
mode in the AUTO
ANSWER setting (KX-
FP215 only) {#}{ 7}{7} { 1} “ TAM/FAX” (default): Telephone Answering Machine/Fax
mode (page 27)
{
2} “ FAX ONLY”: Fax only mode (page 26)
Resetting advanced
features to their default
settings {#}{ 8}{0} { 0} “ NO” (default)
{ 1} “ YES”
To reset the advanced features:
1. {MENU} i {#}{8}{0}
2. Press {1} to select “ YES”. i {SET} i {SET} i
{ MENU}
L The ECM setting (feature #68 on page 42) and the
location setting (feature #74 on page 43) will not be reset.
Feature Feature code Selection
FP205-215AL-PFQX2516ZA-en.book Page 43 Thursday, July 13, 2006 9:31 AM