Paradyne Hotwire 5446 - Manual (Page 10)

10
3. Insert the power cord’s round end into the jack labeled POWER. Plug the
transformer into an AC outlet.
98-15836
POWER
ETHERNET
DSL
Hotwire RTU
Power
Jack
or
Transformer
or
The RTU hardware installation is now complete. When the power cord is installed, the
RTU goes through a power-on self-test.
Power-On
When power is applied, the RTU performs self-diagnostics and the PWR LED is on. The
self-diagnostics includes a power-on self-test. During the power-on self-test, all of the
LEDs turn on for one second.
TST DSL ETHERNET ALM PWR
TM
97-15317
Power – green
Alarm – red
Test – yellow
Digital Subscriber Line – green
Ethernet Link – green
5446
Refer to Troubleshooting, page 14, for LED indications requiring action.