Polycom 2490 - Manual (Page 27)

SoundStation2 Avaya Administrator Guide - 27
Assign a passcode:
1. Press the Menu button ,
choose Admin Setup using the
Scrolling buttons
, and press
the Select button . Choose
Passcode using the Scrolling but-
tons
, and press the Select
button .
2. Press the ASSIGN soft key and enter
a three-digit passcode. If you
make an error, press the
soft
key to erase the error.
3. Press the SAVE soft key. You may
press the CANCEL soft key or the
Exit button if you choose not
to save the passcode.
When you select Passcode from the Admin Setup menu,
the screen will display whether or not a passcode is cur-
rently assigned.
Passcode
►Record the passcode. If the passcode is forgotten,
contact Polycom Support at www.polycom.com/support
and click on “How to Contact Support and Service” for
your local support contact information.
Remove a passcode:
Removing the passcode removes the requirement for an
access passcode for the Admin Setup menu.
1. From the Admin Setup menu,
choose Passcode using the Scrolling
buttons
and press the Select but-
ton .
2. Press the REMOVE soft key, enter
the current passcode, and press the
ENTER soft key. If you decide not to
remove the passcode, press the CAN-
CEL soft key or the Exit button .
►If you enter an incorrect passcode,
you will be notified to try again.
►If you make an error, press the
soft key to erase the error.
Passcode:_
CANCEL ENTER
INCORRECT PASSCODE
LOCATION
PHONE SYSTEM
PASSCODE
ADMIN SETUP
PASSCODE
NOT ASSIGNED
ASSIGN
ENTER NEW
Passcode:_
CANCEL SAVE
PASSCODE
ASSIGNED
CHANGE REMOVE
ENTER CURRENT
Passcode:_
CANCEL ENTER