Polycom 2490 - Manual (Page 16)

SoundStation2 Avaya User Guide - 16
OR
1. Press the
HOLD soft key to place
the first call on hold.
2. Press the Conference button
and enter the number you
wish to call. You may use the
Redial or Direct Dial method.
Programming the Bridge number:
Bridge Soft Key
You may program the telephone number of
your preferred audio conferencing bridge
or service into the SoundStation2 Avaya so
that it is immediately available.
1. Press the Menu button ,
choose Bridge Setup using the
Scrolling buttons,
and press
the Select button .
2. Choose Enter Phone Number and
press the Select button and
then enter the bridge number using
the dial pad. Enter any necessary
prefix such as 9 and/or 1.
► If you make a mistake entering the
number, use the soft key to
correct the error.
3. Press the SAVE soft key or CANCEL
soft key if you wish to cancel the
procedure.
The SPEED DIAL soft key will not
display when the bridge number
is configured.
SETTINGS
PHONE BOOK
THIS PHONE
BRIDGE SETUP
ENTER PHONE NUMBER
EDIT SOFT KEY
BRIDGE SETUP
Conferencing features, including the
number of parties that can be conferenced
vary by ECS/Definity system.
Check with your System Administrator
if you are unsure about the conferencing
services provided.