5 iti6200u3lp host adapter, Figure3.5 iti6200u3lp mechanical drawing, Iti6200u3lp host adapter – LSI Ultra160 User Manual
Page 35: Iti6200u3lp mechanical drawing
Host Adapter Characteristics
3-7
3.2.5
ITI6200U3LP Host Adapter
The ITI6200U3LP (
is an Ultra160 SCSI Low Profile PCI Host
Adapter that provides high performance (160 Mbytes/s per channel).
The ITI6200U3LP has these features:
•
Three connectors
–
Two external 68-pin VHDCI connections
–
One internal 68-pin high density connection
•
LVD/SE termination for both channels
Figure 3.5
ITI6200U3LP Mechanical Drawing
The LVD status indicators for the LSI22915A and ITI6200U3LP are:
Note:
•
J6: PCI 64-bit, universal type board edge connector.
•
J1: 68-pin VHDCI shielded right-angle external channel A and channel B
•
J4: 68-pin high density internal connector for channel B.
•
HDR3: Disable termination when installed for channel A.
•
HDR5: Disable termination when installed for channel B.
•
Subsystem Vendor ID is 13E9.
•
Subsystem ID is 1300.
J6 - PCI
J1
Channel A and Channel B (Side by Side)
Ultra160 SCSI LVD/SE
Channel A LED
Channel B LED
J4 Channel B
Ultra160 SCSI LVD/SE only
HDR5
HDR3
LSI53C1010
LVD Status Indicator
o
Act. (Activity)
On = Bus Busy
o
Term. (Termination)
On = Terminating
o
LVD (Mode)
On = LVD; Off = SE; Blink = (error)