Linksys DUAL-BAND WIRELESS-N WUSB600N - Manual (Page 26)

Chapter 3
Advanced Configuration
23 Dual-Band Wireless-N USB Network Adapter
PEAP
RADIUS - PEAP
If you selected PEAP, configure the following:
Login Name Enter the login name of your wireless
network.
Password Enter the password of your wireless network.
Server Name Enter the name of the authentication server
(this is optional).
Certificate Select the certificate you installed to
authenticate you on your wireless network. If you want to
use any certificate, keep the default, Trust Any.
Inner Authen. Select the authentication method used
inside the PEAP tunnel.
Click Next to continue, or click Back to return to the
previous screen.
The 6. Confirm New Settings screen appears.
Confirm New Settings
To save the new settings, click Save. To edit the new
settings, click Back. To exit Advanced Setup through
the Monitor, click Exit.
The 7. Congratulations screen appears. Click Connect to
Network to implement the new settings immediately
and return to the Status screen. Click Return to Profiles
screen to keep the current settings active and return
to the Profiles screen.
Congratulations
Congratulations! The profile is
successfully configured.