beautypg.com

Advanced configuration, No wi-fi protected setup – Linksys DUAL-BAND WIRELESS-N WUSB600N User Manual

Page 10

background image

Chapter 3

Advanced Configuration

7

Dual-Band Wireless-N USB Network Adapter

Security

This is the security method used by the

network.

Wi-Fi Protected Setup

Click the Wi-Fi Protected Setup

button to connect to a router that supports Wi-Fi

Protected Setup. Refer to the “Wi-Fi Protected Setup”

instructions in the “Status” section at the beginning of

this chapter.

Refresh

Click Refresh to perform a new search for

wireless devices.

Connect

To connect to one of the networks on the list,

select the wireless network, and click Connect.
If the router does not support Wi-Fi Protected Setup,

proceed to the section, “No Wi-Fi Protected Setup”. If the

router supports Wi-Fi Protected Setup , proceed to the

section, “Wi-Fi Protected Setup”.

No Wi-Fi Protected Setup

If the router does not use Wi-Fi Protected Setup, proceed

to the appropriate section, “Wireless Security Disabled” or

“Wireless Security Enabled”.

Wireless Security Disabled

If you connect to a network whose wireless security is

disabled, then you will view this screen:

Click Connect Anyway

Click

1.

Connect Anyway.

Click

2.

Finish.

Congratulations

Congratulations! The Adapter is connected to

the network.

Wireless Security Enabled

If you connect to a network whose wireless security is

enabled, then you will view one of three screens.

Proceed to the appropriate instructions.

1.

WPA2 (Wi-Fi Protected Access 2)
If the network uses WPA2 Personal security, then

the WPA2-Personal Key Needed for Connection screen

appears.

WPA2-Personal Security

Passphrase

Enter the network’s Passphrase (also

called a pre-shared key) of 8-63 characters.
To connect to the network, click Connect. To cancel

the connection, click Cancel.
WPA (Wi-Fi Protected Access)
If the network uses WPA Personal security, then

the WPA-Personal Key Needed for Connection screen

appears.

WPA-Personal Security