Linksys DUAL-BAND WIRELESS-N WUSB600N - Manual (Page 19)

Chapter 3
Advanced Configuration
16 Dual-Band Wireless-N USB Network Adapter
Enter the Adapter’s PIN Number
Enter the PIN Number
Access the web-based utility of the router. (Refer to the 1.
router’s documentation for instructions.)
On the router’s
2. Wi-Fi Protected Setup screen, enter
the Adapter’s PIN number in the PIN field. Then click
Register.
On the Adapter’s PIN number screen, click
3. Next.
Enter the PIN Number
The Adapter connects to the network. 4.
Connecting to the Network
Click 5. Print to print out your wireless network settings.
Then click Finish to return to the Status screen, or click
Exit to exit the Monitor.
Congratulations
Congratulations! The Adapter is connected to
the network.