Linksys DUAL-BAND WIRELESS-N WUSB600N - Manual (Page 12)

Chapter 3
Advanced Configuration
9 Dual-Band Wireless-N USB Network Adapter
Use the Push Button
Use the Push Button
Press the 1. Wi-Fi Protected Setup button on the
router.
Within two minutes, click the
2. Wi-Fi Protected Setup
button on this screen.
The Adapter connects to the network.
3.
Connecting to the Network
Click 4. Print to print out your wireless network settings.
Then click Finish to return to the Status screen, or click
Exit to exit the Monitor.
Congratulations
Congratulations! The Adapter is connected to
the network.
Enter the Adapter’s PIN Number
Enter the PIN Number
Access the web-based utility of the router. (Refer to the 1.
router’s documentation for instructions.)
On the router’s
2. Wi-Fi Protected Setup screen, enter
the Adapter’s PIN number in the PIN field. Then click
Register.